Project: Utah-Jay   -  
            Listing of Entries
    (Please mouse-over any icon to get a description of that function).



Categories
  
Builder Name:JAY TOWNSEND   -  
Project:   Companion   -   VIEW REPORTS
Total Hours:1317.5
Total Flight Time:
Total Expense:N/A
Start/Last Date:Oct 21, 2021 - No Finish Date
Engine:Barrow Lycoming O-360
Propeller:Sensenich 82” GA
Panel:Dynon
 
Friendly URL: https://eaabuilderslog.org?s=Utah-Jay

Home or Last Project Picture

Dec 12, 2021     Axle - (1.5 hours) Category: Landing Gear
Drilled the cotter pin holes in the axles. I put the tires/wheels on the axle and hand tightened the castle nut, test spun the wheel to confirm it was not binding. Next was setting up the drill press to make sure the drill was dead center for the cotter pin. I started with a pilot hole all the way through then went with a 1/8th” drill for the cotter pin.
 


NOTE: This information is strictly used for the EAA Builders Log project within the EAA organization.     -     Policy     -     © Copyright 2024 Brevard Web Pro, Inc.